Final Part

Next, we take the tyres go to the Petronas petrol station near USM to pump the 4 tyres.





After doing this, we take back to USM continue tight the tyres under our craft.
Then, we take our craft go to the old swimming pool in USM tested.

Haha..., finally we successful already. Three of us float on the water surface.

A few days later, then we just tight another two tyres under the craft which is ready for the tested of craft by Encik Wan.

4th Part

Therefore, this time we going to tight it all our bamboos pieces by using the ropes that we bought. Simultaneously, we searched for internet on "what is the technique of using the nylon rope to tight the bamboos?" After we get the answer from internet, we started our jobs.


This the nylon rope that we used to tight the bamboos pieces.






Besides that, we also cut two small and long pieces of bamboos as our roof with dome shape.

3rd Part

We then sketches out the craft that we are going to do shown on the above picture. After that,

we started to cut off the bamboo into 7 long pieces.

After cut off the bamboo into nine pieces, we take 3 pieces of bamboos each of the one break it out into half to put on the surface of the craft as a floor.

2nd Part

After we collect our bamboo, we start our planning.

We are discussing the design of our floating dome.

After that, we discuss with other group members about the materials that we needed.

These are the oil pails and the tyres that we needed for our floating dome.

1st week

Group Name: 3H

Group member: TOH SHENQ JIA (Leader)

LOH CHIN BOK

NELSON WONG SIEW KHIING

We go to the bamboo site with our friends.

We are cutting bamboo trees now.

omg... the bamboo slide in after we cut it... we try to take it out.

We carry the bamboo pieces out from the bamboo sites.

We enjoy the process although it is tough.

Finally, a very fortunate by the helping of USM security lorry's driver to help us sent the pieces of bamboo to our hostel.